食色软件app下载_食色视频app_食色官方

Welcome to the official website of Shanghai Jibei Air Treatment Equipment Co., Ltd.!
30
National Sales Hotline:
4008-829-816
Product area classification:
All commercial dehumidifiers industrial dehumidifiers non-standard dehumidifiers precision dehumidifier air conditioner explosion-proof dehumidifier rotor dehumidifier compressed air dryer industrial humidifier
Sort by default
release time
个结果 30 results
  • JSM03L cabinet wet film humidifier

    JSM03L cabinet wet film humidifier

    Humidification capacity: 3kg / h, applicable area: 20 ~ 40㎡, rated power: 330W, working voltage: 220V / 50Hz, circulating air volume: 1600m³ / h Product introduction: The wet membrane humidifier passes the filtered clean water through the water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an evaporation-type isenthalpic humidification. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). The control head of the automatic water softener is American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • JSM06L cabinet wet film humidifier

    JSM06L cabinet wet film humidifier

    Humidification capacity: 6kg / h, applicable area: 50 ~ 70㎡, rated power: 350W, working voltage: 220V / 50Hz, circulating air volume: 1800m³ / h Product introduction: The wet membrane humidifier passes the filtered clean water through the water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an evaporation-type isenthalpic humidification. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). The control head of the automatic water softener is American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • JSM10L cabinet wet film humidifier

    JSM10L cabinet wet film humidifier

    Humidification capacity: 10kg / h, applicable area: 100 ~ 120㎡, rated power: 370W, working voltage: 220V / 50Hz, circulating air volume: 2600m³ / h Product introduction: Wet membrane humidifier passes filtered clean water through the water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an isobaric humidification of evaporation type. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). The control head of the automatic water softener is American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • JSM15L cabinet wet film humidifier

    JSM15L cabinet wet film humidifier

    Humidification capacity: 15kg / h, applicable area: 150 ~ 180㎡, rated power: 500W, working voltage: 220V / 50Hz, circulating air volume: 4300m³ / h Product introduction: Wet membrane humidifier passes filtered clean water through water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an isobaric humidification of evaporation type. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). The control head of the automatic water softener is American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • JSM20L cabinet wet film humidifier

    JSM20L cabinet wet film humidifier

    Humidifying capacity: 20kg / h, applicable area: 150 ~ 180㎡, rated power: 700W, working voltage: 220V / 50Hz, circulating air volume: 4300m³ / h Product introduction: Wet membrane humidifier passes filtered clean water through the water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an evaporation-type isenthalpic humidification. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • JSM30L cabinet wet film humidifier

    JSM30L cabinet wet film humidifier

    Humidification capacity: 30kg / h, applicable area: 300 ~ 350㎡, rated power: 1200W, working voltage: 220V / 50Hz, circulating air volume: 5000m³ / h Product introduction: Wet membrane humidifier passes filtered clean water through the water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an isobaric humidification of evaporation type. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). The control head of the automatic water softener is American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • Air duct wet film humidifier

    Air duct wet film humidifier

    Product introduction: The air duct wet film humidifier is a combination of a wet film humidifier and a special air duct. It is mainly used in a humidification form used because a humidifier cannot be installed in a combined air conditioning unit or a new fan unit. It can be installed in Any position of the air supply duct can meet the humidification requirements of the entire space or local space. Conditions for use of air duct wet film humidifier: 1. Operating environment: Temperature 0 ~ 40 ℃, Humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: Tap water or the same type of water 4. Water supply pressure: greater than 0.05Mpa 5. Pass wind The wind speed of the pipe wet film humidifier is less than 3.5m / s6. The diameter of the water outlet of the pipe wet film humidifier: 6.1 When the air volume is less than 8000 m3 / h, choose DN25. 6.2 When the air volume is between 8000 and 20000 m3 / h, DN32 is selected. 6.3 When the air volume is greater than 20000 m3 / h, select DN42. Technical parameters of air duct wet film humidifier: Structural diagram: Industry application: Textile industry: reduce the occurrence of thread breakage and clothes wrinkling and failure to form; reduce the trouble of fibrous film when spinning; Static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • Circulating water wet film humidifier

    Circulating water wet film humidifier

    Product introduction: clean tap water enters the circulating water tank through the water inlet pipe, and its high water level is controlled by the water inlet switch; when the humidifier is working, the circulating water pump sends the water in the water tank to the water sprinkler on the top of the humidifier, and the water sprinkler Ensure that the water is evenly distributed to the wet film material. Water penetrates downward from the top of the wet film material and is absorbed by the wet film material to form a uniform water film. When the dry air passes through the humidifier, a part of the water contacts the air, vaporizes, Evaporate to make the air moist (that is, increase the humidity); the other part of the non-evaporated water flows from the lower part of the humidifier back to the circulating water tank; the water in the circulating water tank is repeatedly recycled by the circulating water pump to humidify the air passing through the wet film. When the water level in the circulating water tank drops, the water inlet switch is turned on to replenish the water tank to ensure that the water level of the water tank is maintained at the set height range; when the water level in the circulating water tank drops to a certain height, the low water level switch in the water tank Work to ensure that the circulating water pump stops running in the absence of water. After the water in the circulating water tank is circulated for a certain period of time, the water is drained through the drain of the water tank, the water tank is cleaned, and the clean water is replaced to ensure that the circulating water and the humidified air are not polluted by the secondary. Structure diagram: Organic wet film parameters: Stainless steel wet film parameters: Selection of circulating water wet film humidifier system: 1. Selection of humidifier (see direct-drain wet film humidifier) 2. Width and height of wet film host and circulating water tank Choice of width and height 1) Suppose the circulating water wet film humidifier system is installed behind the air conditioner. W (wet film width) = heat exchanger width H (wet film height) = height inside the air conditioning box 2) assume circulating water wet film Humidifier system installed in the air-conditioning empty section W (wet film width) = width of the air-conditioning box H (wet film height) = height of the air-conditioning box 3) Selection of the width and height of the circulating water tank Installation of circulating water wet film humidifier system: industry Application: Textile industry: reduce the occurrence of thread breakage and clothes wrinkling cannot be formed; reduce the trouble of fibrous film when spinning; reduce the entanglement of raw material yarn on the machine, eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • Direct drainage wet film humidifier

    Direct drainage wet film humidifier

    Product introduction: The clean tap water is sent to the top of the wet film humidifier through the pipeline. Under the action of gravity, it penetrates down the wet film surface and is fully absorbed by the wet film material to form a uniform water film; When the hot air passes through the wet film, the water sufficiently absorbs the heat of the air and evaporates, thereby humidifying the air. During this humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the system does not change. Characteristics of wet film material: The wet film material (also known as "Sedek") is the core of the wet film humidifier. It uses plant fibers, glass fibers, aluminum alloys, stainless steel, etc. as the base material and is sintered with a special component resin treatment. Forms a corrugated plate-like cross-overlapping polymer composite material, which contains a slow-release bacteriostatic agent, which has strong water absorption, good self-cleaning ability, non-toxic, acid and alkali resistance, mold resistance, flame retardant and provides The surface area of contact between moisture and air. At present, the main types of wet films are: organic wet film, inorganic wet film, aluminum alloy wet film, stainless steel wet film, etc. Working principle: The clean tap water through the filter and solenoid valve is sent to the top of the wet membrane through the water supply pipe. Under the action of gravity, the water penetrates down the wet membrane material, and the water is absorbed by the wet membrane material to form a uniform water film. ; When the dry air passes through the wet film material, the water molecules fully absorb the heat in the air and vaporize and evaporate, so that the humidity of the air is increased, and humid air is formed. During this process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains the same (is an isenthalpic humidification) and does not consume additional energy. Organic wet film technical parameters: Test conditions: Intake air working conditions are dry bulb 40 ℃, relative humidity 15% RH, oncoming wind speed 2.5m / s wet film performance: in China, there are usually three wave heights of 5mm, 7mm and 9mm. The ripples are 60 ° × 30 ° staggered opposites and 45 ° × 45 ° staggered opposites. Stainless steel wet film technical parameters Direct drain wet film humidifier structure: Direct drain wet film humidifier Operating conditions: 1. Ambient temperature and humidity: wet film humidifier host 5∽100 ℃ Electric control box 5∽50 ℃ 90% RH or less 2. Critical wind speed: less than 4m / s 3. Water supply quality: tap water or the same type of water 4. Water supply temperature: 5∽40 ℃ 5. Water supply pressure: 0.15∽0.75Mpa5. Water supply pressure: 0.15∽0.75Mpa6. Power supply: 220V / 50HZ direct drainage Wet film humidifier installation: 1. Install a Dmm thickness direct-drain wet film humidifier air conditioner unit. The rear of the surface cooler is provided with an empty section, and the length is (D + 150) mm. 2. An air conditioning unit with a Dmm thickness direct-drain wet-film humidifier must have a water receiving tray at the bottom of the humidifier, and a space for the humidifier must be reserved in the water receiving tray. 3. The vertical drain wet film humidifier should be installed vertically, and the left and right tilt angle should not be greater than 3º. 4. DN15 water supply pipe and 220V / 50HZ three-core socket must be provided on site. The water source and power supply must be led within 2 meters from the installation location of the air-conditioning unit. Schematic diagram of the installation of a direct-drain wet-film humidifier in an air-conditioning unit. Industry applications: Textile industry: reduce the occurrence of thread breakage and clothes wrinkling and failure to form; Eliminate static electricity and dust. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • High-pressure spray humidifier

    High-pressure spray humidifier

    Product introduction: High-pressure spray humidification is a method of isenthalpic humidification. After the tap water is pressurized by the humidifier host, it is atomized by a special nozzle to form fine water mist particles, which are exchanged with the flowing air for humid heat, thereby vaporizing and evaporating. 2. Increase the humidity of the air to achieve humidification of the air. The high-pressure spray humidifier is mainly used in conjunction with air-conditioning units, which has the advantages of energy saving, safety and reliability. If used in conjunction with a wet film baffle, the secondary vaporization effect produced by it can achieve higher humidification efficiency. It can also prevent water mist from drifting in the air supply section of the unit, and has the effect of protecting the fan. Features of high-pressure spray humidifier: 1. Iso-enthalpy humidification mode, single machine spray volume can reach 600kg / h. 2. It adopts the booster pump imported from Italy, which runs smoothly, low noise, long life, safe and reliable, and ensures that the water pressure supplied to the nozzle is constant within the range of 0.3MPa ~ 0.4MPa. 3. The special ceramic spray head ensures that the diameter of the sprayed water mist particles is as small as possible (average diameter is between 20 and 35 μm), improves the humidification efficiency, and the ceramic spray head is resistant to corrosion and abrasion. 4. High-precision filtering system prevents the nozzle from being blocked. 5. Integration of manual and automatic operation can realize automatic adjustment and control of humidity. Selection of high-pressure spray humidifier: calculation of effective humidification amount (E): E = 1.2 × Q × (X2-X1) × KE—effective humidification amount (kg / h) Q—new air volume (m3 / h) X1—humidification Water content of front air (kg / kg dry air) X2—Moisture content of air after humidification (kg / kg dry air) 1.2—Air density K = 1.1 (factor of safety) Calculation of spray volume (W): W = E ÷ η W—Spraying amount (kg / h) E—Effective humidifying capacity (kg / h) η—Humidification efficiency New air-conditioning unit η = 33% Combined air-conditioning unit η = 35% Calculation of the number of nozzles (N): single nozzle spray The quantity is 15㎏ / hN = W / 15 Equipment parameter table: High-pressure spray humidifier Operating conditions: 1. Ambient temperature: Humidifier host 1 ~ 40 ℃ ≤ 80% RH Spray device 1 ~ 80 ℃. 2. Water quality: tap water, purified water or similar water. 3. Feed water pressure: ≥ 0.1MPa. 4. Feed water temperature: 4 ~ 55 ℃. 5. Humidification section length: 0.45 ~ 1.1m. 6. Inlet wind speed: 0.5 ~ 3.5m / s 7. Inlet air temperature: ≥ 15 ℃. Installation diagram: Industry application: Textile industry: Textile factory humidity control, eliminating static electricity and dust reduction. Improve the quality of the fabric by using the principle of wet expansion and shrinkage. Paper industry: control the humidity of paper, eliminate static electricity, reduce dust and improve the quality of paper manufacturing. Computer room: Control and eliminate static electricity in various computer room. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory and other humidity control and eliminate static electricity. Spraying industry: Humidity control in automobile painting plants and various spraying plants, eliminating static electricity, deodorization and dust reduction. Plastic industry: humidity control and elimination of static electricity in plastic injection molding plants and plastic product manufacturing plants. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity. Printing industry: plastic printing, fine printing, special printing humidity control and static elimination. Laboratory: Various types of inspection, testing, quality, analysis, laboratory environment constant humidity. Tobacco industry: tobacco processing, production humidity control and dust reduction. HVAC industry: central air-conditioning humidification, computer room central air-conditioning humidification and static elimination. Fresh-keeping and storage: The freshness-keeping and storage of fruit sparse products under constant humidity. Food industry: dry, dehydrated food resurgence, preservation. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Aquaculture industry: moisturizing and disinfecting large-scale breeding of livestock, birds and insects. Artificial landscape: Tropical artificial rain forest, film and television, exhibitions, etc. imitate the natural environment cloud landscape.
  • High pressure micro mist humidifier (PID control)

    High pressure micro mist humidifier (PID control)

    Product introduction: The high-pressure micro-mist humidifier is a high-tech product developed by our company in combination with new foreign technologies. This technology is widely used abroad and the technology is extremely mature. Our company has achieved stability in the system and reduced energy consumption. Breakthrough progress and successful integration of multiple systems, constant pressure water supply system, water cut protection system, water leakage protection system, automatic humidity control system, motor protection system, automatic water supply, drainage system, automatic pressure relief system, multi-frequency Multi-channel control system, etc. Make the system more reliable and safe overall. High-pressure micro-mist humidifier selection: imported industrial plunger pumps and motors, world-leading multi-channel control system protection, large spray volume, arbitrary nozzle configuration, 5 micron precision combination filter, effectively solving nozzle blockage, multiple control methods Intermittent spraying while ensuring space humidity, sealing non-recyclable water sources to prevent bacteria from multiplying. System working principle: The high-pressure micro-mist humidifier uses a high-pressure plunger pump to pressurize the water treated by a precision filter to 5-7 MPa, and then transfer it to the atomizing nozzle through a high-pressure pipeline. It generates high-speed rotation and sprays 5-10 μm water mist particles into the entire space. The water mist absorbs heat in the air, vaporizes and evaporates, the space humidity increases, and the temperature of the air decreases. It is suitable for the whole or local humidification, temperature reduction, dust reduction, static elimination and humidification of air-conditioning section in large space of textile, cigarette, electronics, industrial dust removal, brewing, printing and other industries. Technical parameters: High-pressure micro-mist humidifier system composition: System composition diagram High-pressure pump station (high-pressure micro-mist host): The high-pressure micro-mist humidifier system adopts an industrial plunger pump, which can operate continuously for 24 hours. No nozzles and water mist distributor Power vulnerable parts will not be damaged in high dust environment. The amount of humidification is large and the nozzles can be freely combined. The humidification amount can be adjusted steplessly from 5kg / h to 900kg / h. The water of the high-pressure micro-mist system is sealed and non-recyclable, and does not cause bacteria to multiply. a) The high-pressure micro-mist host includes equipment housing, base, high-pressure plunger pump, motor, water shortage protection device, pressure regulating valve, pressure sensor, sub-pressure box, pressure gauge, high-pressure pipeline fittings and electrical parts. b) The shell of the host is made of stainless steel, and the surface is sprayed with plastic. Control system a) The control system includes high-pressure drain valve, humidity sensor, humidity controller, measurement and control electric control box, cable signal line and cable bridge, etc. b) The humidity sensor senses the humidity in the air to control the opening and closing of the high-pressure solenoid valve, When the humidity reaches the requirements and the high-pressure solenoid valve is closed, the high-pressure drain valve will immediately open and drain the residual water in the pipeline to prevent bacteria from multiplying. Main unit configuration table: atomizing nozzle and connecting pipeline unit: ultra-micro atomizing nozzle: US, Taiwan, Japan stainless steel, copper stainless steel, stainless steel ceramic multiple materials, various nozzles, shell made of copper or stainless steel, core Part of it is made of titanium alloy and has its own pressure-limiting start valve. It has the characteristics of fine spray, no wear, small pressure loss, anti-blocking, no dripping, anti-drip, and long life with filtering. Aperture: 0.1524mm; 0.2mm; 0.3mm Spray volume: 2.05-9kg / h (at P = 7MPa) Depending on the function of the venue, the nozzles (1 #-10 #) can be used with an operating pressure of 30- -220kg, mist particles 1-10 microns (0.01mm), mist length 1.5-2.0 meters. All pipes are made of Φ8 × 1 copper pipe or high-pressure stainless steel pipe or PE pipe. Good weather resistance, acid and alkali resistance, high pressure copper or stainless steel pipes can be selected. Water treatment system: The humidification system is equipped with a 5 micron level 3 ultrafiltration fine filter, and the filtration method is a fine three-layer osmotic filtration to prevent system clogging; in order to prevent "white powder" pollution and clogging of the nozzle that may be caused by high water hardness , Install a water softener in the water source for centralized processing to obtain the soft water supply to the host of the humidifier. Generally speaking, the entire high-pressure spray dust removal equipment is a distributed system, and the specific configuration depends on the site conditions. Nozzles and joints are distributed in various areas, and the opening and closing status of each area is controlled by valves, and then connected to the host system through high-pressure copper pipes. Product Features: 1. Fog is fine: The high-pressure micro-mist nozzle can produce 5 billion fog droplets per second, and the diameter of the droplets is only 1 ~ 15μm, which is like a cloud in the mountains, with humidifying and cooling effects **. The purpose of the spray system is to enable the mist particles produced by the spray system to evaporate before contacting the ground. The method to achieve this is to make the mist particles smaller and better. The smaller the fog particles, the larger the surface area of the fog particles in terms of the number of fog particles. As a result, the higher the evaporation rate of the fog particles, the better the humidification effect can be achieved. The average diameter of the fog point produced by this spray system is about 10 microns (0.01mm). Because the body is very small (1/10 of the average human hair diameter), the weight is light, and it can diffuse and float like a natural fog, so even in relatively Areas with high humidity can also be completely absorbed by the air, giving full play to the effect of humidification. The smaller the nozzle nozzle hole, the finer the spray fog point and the faster the evaporation, the better the cooling effect. In order to prevent the nozzle from being blocked, a high-quality water supply is necessary. A double filter (25 micron and 5 micron filters are used in series) at the inlet of the water booster pump can meet the requirements. 2. Energy saving: atomizing 1 kg of water consumes only 6W of power, which is one hundredth of the traditional electric humidifier, and one-tenth of the centrifugal humidifier and soda-water mixed humidifier. 3. Reliable: The main unit of the high-pressure micro-mist humidification system adopts imported industrial plunger pumps, which can operate continuously for 24 hours. The entire system design is safe and stable, and unmanned management is achieved, especially the sprinkler and water mist distributor are unpowered running parts It will not be damaged in a high dust environment; 4. Safe automatic pressure relief: When the sprayer stops working, the body automatically releases the pressure of the high-pressure nozzle to prevent the nozzle from dripping water. 5. Automatic water shortage and power failure system: prevent the pump from idling when there is no water, and increase the life of the pump. 6. Hygiene: The water of the high-pressure micro-mist system is sealed and non-recyclable, and will not cause the reproduction of bacteria. 7. Humidification amount: The humidification amount is large and the nozzles can be freely combined. The humidification amount can be adjusted steplessly from 5kg / h to 1800kg / h. 8. Humidification efficiency is over 95%. 9. Wide application: In addition to humidification, it is also widely used in artificial landscaping, dust suppression, deodorization, greenhouse, seedling raising, livestock breeding, spraying, industrial equipment cooling, and many other industrial fields. Conditions for using high-pressure micro-mist humidifier: 1. Ambient temperature and humidity: host temperature 5 ℃ ∽60 ℃ relative humidity ≤80% 2. Water quality: tap water, purified water or similar water quality 3. Water quality ** temperature: 60 ℃ 4. Water supply pressure: 0.3-0.8Mpa 5. Power supply: 380V / 50HZ Installation diagram: Industry application: Textile industry: Textile factory humidity control, eliminate static electricity and dust reduction. Improve the quality of the fabric by using the principle of wet expansion and shrinkage. Paper industry: control the humidity of paper, eliminate static electricity, reduce dust and improve the quality of paper manufacturing. Spraying industry: Humidity control in automobile painting plants and various spraying plants, eliminating static electricity, deodorization and dust reduction. Plastic industry: humidity control and elimination of static electricity in plastic injection molding plants and plastic product manufacturing plants. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity. Printing industry: plastic printing, fine printing, special printing humidity control and static elimination. Laboratory: Various types of inspection, testing, quality, analysis, laboratory environment constant humidity. Tobacco industry: tobacco processing, production humidity control and dust reduction. HVAC industry: central air-conditioning humidification, computer room central air-conditioning humidification and static elimination. Fresh-keeping and storage: The freshness-keeping and storage of fruit sparse products under constant humidity. Food industry: dry, dehydrated food resurgence, preservation. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Aquaculture industry: moisturizing and disinfecting large-scale breeding of livestock, birds and insects. Artificial landscape: Tropical artificial rain forest, film and television, exhibitions, etc. imitate the natural environment cloud landscape.
  • High pressure micro mist humidifier (PLC control)

    High pressure micro mist humidifier (PLC control)

    Working principle: HPF series inverter high-pressure micro-mist host has built-in ultrafiltration water treatment module, high-pressure atomization module, and intelligent control module, which is connected to the municipal water source atomization treatment. The intelligent control module controls the plunger pump unit constant pressure output 7.0Mpa water flow. 5-15um water mist particles are formed by special nozzles at the end to realize landscape, cooling and other environmental optimization functions. Its intelligent control module controls to realize automatic protection of the host from water shortage, low pressure and high pressure overload, and can realize program-controlled regular startup, shutdown, gap operation and other functions. Product features: Low-carbon environmental protection --- water saving, power saving, low consumption. Reliable and durable ----- Imported ** products are used for power system components. Green health ----- Pure water purification treatment technology, removes all kinds of harmful substances to the human body, and reaches sanitary level. Convenient control ----- key touch screen human-machine interactive interface, remote control mode is optional for convenient operation; easy installation ----- pipe connection is snap-in connection, installation, commissioning and maintenance are simple and convenient. Product parameter table:
  • High-pressure spray dosing machine

    High-pressure spray dosing machine

    Working principle: HPF series high-pressure micro-mist dosing and disinfection host has built-in ultra-filtration water treatment module, high-pressure atomization module, and intelligent control module, which is connected to the municipal water source atomization treatment. The intelligent control module controls the plunger pump unit constant pressure output 7.0Mpa water flow. At the end, a special spray head is used to form 5-15um water mist particles to achieve landscape, cooling and other environmental optimization functions. Its intelligent control module controls to realize automatic protection of the host from water shortage, low pressure and high pressure overload, and can realize program-controlled regular startup, shutdown, gap operation and other functions. Product features: Low-carbon environmental protection --- water saving, power saving, low consumption. Reliable and durable ----- Imported ** products are used for power system components. Green health ----- Pure water purification treatment technology, removes all kinds of harmful substances to the human body, and reaches sanitary level. Convenient control ----- Key touch screen human-machine interaction interface, remote control mode is optional for easy operation. Convenient installation ----- The pipe connection adopts snap-in connection, which is simple and convenient to install, debug and maintain.
  • High pressure spray duster

    High pressure spray duster

    Working principle: The high-pressure micro-mist dust suppression system uses high-pressure atomization technology to generate micro-mist with very fine particles. The particle size of the mist is 100% less than 10 microns, and the average is 7 microns. These ultra-fine droplets can absorb (condensate) dust particles of similar size, continuously increase the size and quality of dust particles, condense into larger and heavier powders, and then accelerate sedimentation by their own gravity. Characteristics of dust suppression by micro-mist 1. It can control dust at the dust source, the source of pollution. 2. The water mist particles are micro-mist, with high dust suppression efficiency. The treatment effect for inhalable dust below 10μm can reach more than 90% to avoid the harm of silicosis. 3. The water consumption is small, the material humidity is small and the weight is small, and the material (coal) has basically no heat value loss and no secondary pollution. 4. Small area, operation, fully automatic control. 5. Low equipment investment, low operation and maintenance costs. 6.Suitable for sources of fugitive emissions, confined or semi-confined spaces. 7. Greatly reduce the chance of dust explosion.
  • Ultrasonic humidifier and fresh-keeping machine

    Ultrasonic humidifier and fresh-keeping machine

    Principle of humidifying and fresh-keeping machine: Ultrasonic humidifying and fresh-keeping machine uses electronic over-frequency vibration (oscillating frequency is 1.7MHz, which exceeds human hearing range, and has no harm to human body and animals), and the water is thrown away from the water surface through the high-frequency resonance of the atomizer. Generates natural flowing water mist, without the need for heating or chemicals, produces 1-5μm water particles floating in the air to achieve air moistening effect. Product features: The main components of the unit are made of accessories from well-known international brands, which is more adaptable to the quality of atomized water. The same atomizer can work normally with pure water or tap water. The power supply has a wide range of applications, which ensures that the product can still be used normally in situations where there is a large change in mains power. A power polarity protection circuit is provided to prevent the user from damaging the product when it is reversed (it does not work when reversed). A delay circuit is set up to avoid damage to the circuit due to excessive impact current at startup. The circuit of a single nozzle adopts an independent design and an overcurrent protection circuit is used to avoid the burnout of the circuit of one nozzle and damage the power supply, and it will not affect the normal operation of other nozzles. The current of the whole machine is less affected by voltage and temperature. Because the current in each nozzle is automatically adjusted by electricity, the current will decrease with the increase of temperature (without affecting the amount of fog), which prevents the power tube from heating seriously and increasing the current. Causes a vicious cycle and damages the atomizer. This product adopts a 304 stainless steel housing with high thermal conductivity, strong corrosion resistance and good mechanical strength, which reduces the temperature difference between the inside of the host and water, thereby extending the product's service life. The company welcomes your letter to negotiate business with * high-quality products and * preferential prices. Technical parameters: Operating conditions: ambient temperature -1 to 40 degrees Celsius. Feed water pressure 1-4KG / CM 2. Ambient humidity ≤99% RH. The feed water temperature is 1-30 degrees Celsius. There are no high-temperature auxiliary radiation sources and no strong magnetic field interference sources in the surrounding environment. Water quality requirements: ordinary tap water, demineralized water, and purified water. Industry applications: Textile industry: Textile factory humidity control, eliminating static electricity and dust reduction. Improve the quality of the fabric by using the principle of wet expansion and shrinkage. Paper industry: control the humidity of paper, eliminate static electricity, reduce dust and improve the quality of paper manufacturing. Computer room: Control and eliminate static electricity in various computer room. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory and other humidity control and eliminate static electricity. Spraying industry: Humidity control in automobile painting plants and various spraying plants, eliminating static electricity, deodorization and dust reduction. Plastic industry: humidity control and elimination of static electricity in plastic injection molding plants and plastic product manufacturing plants. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity. Printing industry: plastic printing, fine printing, special printing humidity control and static elimination. Laboratory: Various types of inspection, testing, quality, analysis, laboratory environment constant humidity. Tobacco industry: tobacco processing, production humidity control and dust reduction. HVAC industry: central air-conditioning humidification, computer room central air-conditioning humidification and static elimination. Fresh-keeping and storage: The freshness-keeping and storage of fruit sparse products under constant humidity. Food industry: dry, dehydrated food resurgence, preservation. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Aquaculture industry: moisturizing and disinfecting large-scale breeding of livestock, birds and insects. Artificial landscape: Tropical artificial rain forest, film and television, exhibitions, etc. imitate the natural environment cloud landscape.
  • Ultrasonic humidifier (A section)

    Ultrasonic humidifier (A section)

    Working principle: The ultrasonic industrial humidifier uses electronic over-frequency oscillation (the oscillation frequency is 1.7MHz, which exceeds the human hearing range and does no harm to humans and animals). It is generated by throwing 0 water off the water surface through the high-frequency resonance of the atomizing sheet. The naturally flowing water mist does not need heating or chemicals to produce 1-10μ water particles floating in the air to achieve air moistening effect. At the same time, the appropriate relative humidity has a decisive role in improving product quality, reducing waste rate, antistatic, eliminating dust, purifying air, and improving the environment. Host structure diagram: Technical parameters: Remarks: Large humidification models can be customized according to customer specific requirements, and machines made of pure stainless steel can also be customized. Product features: Operating conditions: ambient temperature -1 to 40 degrees Celsius. Feed water pressure 1-4KG / CM 2. Ambient humidity ≤99% RH. The feed water temperature is 1-30 degrees Celsius. There are no high-temperature auxiliary radiation sources and no strong magnetic field interference sources in the surrounding environment. Industry applications: Textile industry: Textile factory humidity control, eliminating static electricity and dust reduction. Improve the quality of the fabric by using the principle of wet expansion and shrinkage. Paper industry: control the humidity of paper, eliminate static electricity, reduce dust and improve the quality of paper manufacturing. Computer room: Control and eliminate static electricity in various computer room. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory and other humidity control and eliminate static electricity. Spraying industry: Humidity control in automobile painting plants and various spraying plants, eliminating static electricity, deodorization and dust reduction. Plastic industry: humidity control and elimination of static electricity in plastic injection molding plants and plastic product manufacturing plants. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity. Printing industry: plastic printing, fine printing, special printing humidity control and static elimination. Laboratory: Various types of inspection, testing, quality, analysis, laboratory environment constant humidity. Tobacco industry: tobacco processing, production humidity control and dust reduction. HVAC industry: central air-conditioning humidification, computer room central air-conditioning humidification and static elimination. Fresh-keeping and storage: The freshness-keeping and storage of fruit sparse products under constant humidity. Food industry: dry, dehydrated food resurgence, preservation. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Aquaculture industry: moisturizing and disinfecting large-scale breeding of livestock, birds and insects. Artificial landscape: Tropical artificial rain forest, film and television, exhibitions, etc. imitate the natural environment cloud landscape.
  • Ultrasonic humidifier (Section B)

    Ultrasonic humidifier (Section B)

    Working principle: The ultrasonic industrial humidifier uses electronic over-frequency oscillation (the oscillation frequency is 1.7MHz, which exceeds the human hearing range and has no harm to humans and animals). It is generated by throwing 0 water off the water surface through the high-frequency resonance of the atomizer The naturally flowing water mist does not need heating or chemicals to produce 1-10μ water particles floating in the air to achieve air moistening effect. At the same time, the appropriate relative humidity has a decisive role in improving product quality, reducing waste rate, antistatic, eliminating dust, purifying air, and improving the environment. Host structure diagram: Technical parameters: Remarks: Large humidification models can be customized according to customer specific requirements, and machines made of pure stainless steel can also be customized. Product features: Operating conditions: ambient temperature -1 to 40 degrees Celsius. Feed water pressure 1-4KG / CM 2. Ambient humidity ≤99% RH. The feed water temperature is 1-30 degrees Celsius. There are no high-temperature auxiliary radiation sources and no strong magnetic field interference sources in the surrounding environment. Industry applications: Textile industry: Textile factory humidity control, eliminating static electricity and dust reduction. Improve the quality of the fabric by using the principle of wet expansion and shrinkage. Paper industry: control the humidity of paper, eliminate static electricity, reduce dust and improve the quality of paper manufacturing. Computer room: Control and eliminate static electricity in various computer room. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory and other humidity control and eliminate static electricity. Spraying industry: Humidity control in automobile painting plants and various spraying plants, eliminating static electricity, deodorization and dust reduction. Plastic industry: humidity control and elimination of static electricity in plastic injection molding plants and plastic product manufacturing plants. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity. Printing industry: plastic printing, fine printing, special printing humidity control and static elimination. Laboratory: Various types of inspection, testing, quality, analysis, laboratory environment constant humidity. Tobacco industry: tobacco processing, production humidity control and dust reduction. HVAC industry: central air-conditioning humidification, computer room central air-conditioning humidification and static elimination. Fresh-keeping and storage: The freshness-keeping and storage of fruit sparse products under constant humidity. Food industry: dry, dehydrated food resurgence, preservation. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Aquaculture industry: moisturizing and disinfecting large-scale breeding of livestock, birds and insects. Artificial landscape: Tropical artificial rain forest, film and television, exhibitions, etc. imitate the natural environment cloud landscape.
  • Non-standard ultrasonic humidifier

    Non-standard ultrasonic humidifier

    Remarks: We can customize high-humidity models according to customer's specific requirements, and can also customize machines made of pure stainless steel. Working principle: The ultrasonic industrial humidifier uses electronic over-frequency oscillation (the oscillation frequency is 1.7MHz, which exceeds the human hearing range and has no harm to humans and animals). The high-frequency resonance of the atomizing sheet will throw water off the water surface to produce natural The flowing water mist does not need heating or chemicals to produce 1-10μ water particles floating in the air to achieve air moistening effect. At the same time, the appropriate relative humidity has a decisive role in improving product quality, reducing waste rate, antistatic, eliminating dust, purifying air, and improving the environment. Host structure diagram: Product features: Operating conditions: ambient temperature -1 ~ 40 degrees Celsius. Feed water pressure 1-4KG / CM 2. Ambient humidity ≤99% RH. The feed water temperature is 1-30 degrees Celsius. There are no high-temperature auxiliary radiation sources and no strong magnetic field interference sources in the surrounding environment. Water quality requirements: ordinary tap water, demineralized water, and purified water. Industry applications: Textile industry: Textile factory humidity control, eliminating static electricity and dust reduction. Improve the quality of the fabric by using the principle of wet expansion and shrinkage. Paper industry: control the humidity of paper, eliminate static electricity, reduce dust and improve the quality of paper manufacturing. Computer room: Control and eliminate static electricity in various computer room. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory and other humidity control and eliminate static electricity. Spraying industry: Humidity control in automobile painting plants and various spraying plants, eliminating static electricity, deodorization and dust reduction. Plastic industry: humidity control and elimination of static electricity in plastic injection molding plants and plastic product manufacturing plants. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity. Printing industry: plastic printing, fine printing, special printing humidity control and static elimination. Laboratory: Various types of inspection, testing, quality, analysis, laboratory environment constant humidity. Tobacco industry: tobacco processing, production humidity control and dust reduction. HVAC industry: central air-conditioning humidification, computer room central air-conditioning humidification and static elimination. Fresh-keeping and storage: The freshness-keeping and storage of fruit sparse products under constant humidity. Food industry: dry, dehydrated food resurgence, preservation. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Aquaculture industry: moisturizing and disinfecting large-scale breeding of livestock, birds and insects. Artificial landscape: Tropical artificial rain forest, film and television, exhibitions, etc. imitate the natural environment cloud landscape.
  • Dry mist humidifier

    Dry mist humidifier

    Features of dry mist humidifier: 1. Ultra-fine mist particles with an average particle diameter of 7.5 μm; 2. Large spray volume, 2.4L / h of one nozzle (at 0.3Mpa air pressure); 3. Low air consumption, one nozzle Only 29 NL / min (at 0.3Mpa air pressure); 4, * install more four nozzles, and easy installation; 5, quick release decomposition, easy maintenance; 6, long spray distance, high spray distance up to 4m or more Quality spray, humidifying effect is remarkable; 7, remote control, time control, automatic humidity control can be achieved; 8, the main body of the dry mist humidifier is made of polypropylene material, never rust; 9, the nozzle is made of 316 food grade stainless steel, unique Designed to be non-blocking; 10. Equipped with required pressure regulating valves, joints, brackets, etc., for easy installation; 11. Suitable for humidification in small spaces without wetting the wall; Performance parameter table of dry fog humidifier: Dry fog humidifier installation kit:
  • Air-water mixed humidifier

    Air-water mixed humidifier

    Product introduction: The gas-water mixed humidification system works on the principle of vacuum siphoning. The separated compressed gas and liquid meet at a special stainless steel nozzle to generate an ultra-fine mist of a two-stage atomization system. In the two-stage atomization system, the gas-water mixture is sprayed from the central hole to achieve the first atomization; and then, the gas from the side spray holes is fully mixed to achieve the second atomization. Adjust the compression ratio of water and gas as needed to obtain the best spray effect; spray particle size: 6μm-10μm. Performance characteristics: 1. Controllable pressure setting and controllable coverage; 2. When a single humidifier has a pressure of 3 bar, the distance between the unilateral nozzle and the mist of the nozzle is 5-7 meters, which can achieve the ideal humidification of 100-150 square meters. management. 3. Gas power, two-stage atomization system; 4. High-quality spray particles, good atomization effect, special vacuum valve design, compressed air negative pressure to induce humidification to avoid wetland occurrence; 5, multiple safety protection devices to ensure the nozzle No dripping or spraying. 6. The time delay design of the gas path effectively prevents nozzle clogging; the air-water mixing and maintenance-free design solves the problem of nozzle clogging in the traditional spraying process. 7. Optional temperature and humidity automatic control sensors can be used to better display the humidity in the humidification area. According to the actual temperature and humidity of the air, automatic humidification and cooling can be realized. 8. Maintenance-free design, long service life, can always keep good Spray state. 9. The installation is quick and convenient. The spraying direction can be adjusted at any angle. As long as the air compressor is connected, the spraying can be easily performed. Installation instructions: 1. No liquid pressure control unit is required, and the required water pressure is 0.5-3bar. 2. If the nozzle or piping system leaks, or similar risk factors may exist, please stop using it. 3. Make sure that the water pipe and air pipe are firmly connected and have a good seal to prevent air leakage and water leakage. 4. When the humidification stops spraying, the water way must be closed first, and the air way must be closed after 1 minute interval. 5. Install the humidifier horizontally, and do not put other items within a short distance directly below the nozzle. 6. Keep the air pressure at 1 ~ 4bar, water pressure at 0.5 ~ 3bar, and the pressure resistance of the connecting hose is 8bar. 8. Do not disassemble the humidifier under the condition of air pressure and water pressure. Installation diagram: Note of humidifier: 1. The system needs to provide water source; the pressure of the water source is not lower than 1kg / h. 2. Air pressure 2.5-4.5bar, water pressure 1-4bar. Air pressure regulating valve is installed in the air circuit, and water pressure regulating valve / valve is installed in the water circuit. 3. The spray system requires pure water, soft water or pure water. 4. Customers provide 220V stable voltage. Water softeners and water purifiers (optional). After water is evaporated, minerals dissolved in water may become fine particles and float in the air, or they may stick to items. The degree of adhesion is related to water quality. It is recommended to install Water softener or pure water machine. Reduce minerals to **. Industry applications: Textile industry: reduce the occurrence of thread breakage and clothes wrinkling cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
about us
Product center
Service Center
CONTACT
contact us
  • Sales Hotline: 4008-829-816
  • Company email: jibei118@sina.com
  • Address of Company: A3-2016, Lane 1588, South Wangyuan Road, Fengxian District, Shanghai
You are the 56457 visitor!