食色软件app下载_食色视频app_食色官方

Welcome to the official website of Shanghai Jibei Air Treatment Equipment Co., Ltd.!
30
National Sales Hotline:
4008-829-816
Product area classification:
All commercial dehumidifiers industrial dehumidifiers non-standard dehumidifiers precision dehumidifier air conditioner explosion-proof dehumidifier rotor dehumidifier compressed air dryer industrial humidifier
Sort by default
release time
个结果 Totally 9 results
  • JSM03L cabinet wet film humidifier

    JSM03L cabinet wet film humidifier

    Humidification capacity: 3kg / h, applicable area: 20 ~ 40㎡, rated power: 330W, working voltage: 220V / 50Hz, circulating air volume: 1600m³ / h Product introduction: The wet membrane humidifier passes the filtered clean water through the water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an evaporation-type isenthalpic humidification. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). The control head of the automatic water softener is American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • JSM06L cabinet wet film humidifier

    JSM06L cabinet wet film humidifier

    Humidification capacity: 6kg / h, applicable area: 50 ~ 70㎡, rated power: 350W, working voltage: 220V / 50Hz, circulating air volume: 1800m³ / h Product introduction: The wet membrane humidifier passes the filtered clean water through the water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an evaporation-type isenthalpic humidification. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). The control head of the automatic water softener is American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • JSM10L cabinet wet film humidifier

    JSM10L cabinet wet film humidifier

    Humidification capacity: 10kg / h, applicable area: 100 ~ 120㎡, rated power: 370W, working voltage: 220V / 50Hz, circulating air volume: 2600m³ / h Product introduction: Wet membrane humidifier passes filtered clean water through the water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an evaporation-type isenthalpic humidification. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). The control head of the automatic water softener is American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • JSM15L cabinet wet film humidifier

    JSM15L cabinet wet film humidifier

    Humidification capacity: 15kg / h, applicable area: 150 ~ 180㎡, rated power: 500W, working voltage: 220V / 50Hz, circulating air volume: 4300m³ / h Product introduction: Wet membrane humidifier passes filtered clean water through water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an evaporation-type isenthalpic humidification. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). The control head of the automatic water softener is American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • JSM20L cabinet wet film humidifier

    JSM20L cabinet wet film humidifier

    Humidifying capacity: 20kg / h, applicable area: 150 ~ 180㎡, rated power: 700W, working voltage: 220V / 50Hz, circulating air volume: 4300m³ / h Product introduction: Wet membrane humidifier passes filtered clean water through the water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an evaporation-type isenthalpic humidification. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). The control head of the automatic water softener is American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • JSM30L cabinet wet film humidifier

    JSM30L cabinet wet film humidifier

    Humidification capacity: 30kg / h, applicable area: 300 ~ 350㎡, rated power: 1200W, working voltage: 220V / 50Hz, circulating air volume: 5000m³ / h Product introduction: Wet membrane humidifier passes filtered clean water through the water supply pipe The water is sent to the top of the humidifier. Under the action of gravity, the water permeates down the wet film surface and is absorbed by the wet film material that is absorbed by water to form a uniform water film. When the dry air passes through the wet film material, Water molecules fully absorb the heat in the air to vaporize and evaporate, thereby increasing the humidity of the air and forming humid air. During the humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains unchanged. Technical parameters: Structural diagram: Key points for humidification of electronic workshops and computer rooms: Wet film humidification is an evaporation-type isenthalpic humidification. The humidification process occurs on the surface of the wet film (inside the cabinet), so the risk of falling water and condensation is eliminated, and the installation is reliable. Electronic production workshops, especially surface mount workshops (SMT) or communication equipment rooms, usually have extremely high internal heat. Air conditioners supply low-temperature air throughout the year. At this time, it is obviously impossible to meet humidification requirements with air-conditioning humidification. Cabinet type installed in the workshop The wet film humidifier directly handles the dry and hot air in the workshop, which increases the humidity of the air, and also reduces the temperature of the workshop, and the energy saving effect of humidification **. For most electronics companies, due to the low moisture content of indoor air in winter, proper humidification is required. For users with central air-conditioning (including the unit with a humidification section), it can be recommended to use a membrane circulating water humidifier or a high-pressure micro-mist damper for humidification, which is more energy-saving and environmentally friendly. Automatic humidity control (standard configuration) Place the humidity sensor controller in a location where the humidifier can't directly blow, and it is easy to observe. Connect the wall power supply and connect the humidifier to the output end. When the humidity reaches the set value, the humidifier will automatically stop Humidify. When the humidity drops, it will automatically turn on and humidify to maintain the required humidity in the room. Large font high brightness digital display screen, long life resistance humidity sensor controller. Control accuracy ± 5%. Filter (standard configuration) 10-inch 5μ cup precision filter, specially made without cracking, can filter out rust, sand, hemp rope, raw material belt, colloid and other solid particles in water. Alternative water tanks are available, either in stainless steel or hard plastic. Full-automatic water softeners and water purifiers (optional) use the full-automatic water softeners provided by Jibei Company to delay the wet film fouling of the evaporation material (extend the replacement time, usually once every 8-15 years). The control head of the automatic water softener is American FLECK company products. This equipment has a high degree of automation. It can realize automatic operation through program control, and the regeneration process is fully automated. Users only need to regularly add regenerant (industrial salt) to achieve continuous water supply under fully automatic conditions. Selection of humidifiers for electronic workshops At present, domestic electronics companies have become more and more stringent in the quality and static requirements of workshops. In order to ensure the quality of products shipped from the factory, the temperature and humidity in the production workshop must be strictly controlled, especially the humidity. Drying can easily generate static electricity in the plant, causing damage to CMOS integrated circuits. Main functions of wet film cabinet machine: 1. Digital display, automatic humidity control. 2. The machine comes with cleaning and drainage functions. When the equipment is not in use or when the cycle is over, the cleaning / draining switch can be turned on. The fan will automatically dry the wet film to prevent the wet film from rotting and producing mold and bacteria. 3. The machine will automatically stop working when the machine is short of water, and the pump will not run. It can drain water automatically to ensure the water tank is clean. Product features: Evaporative humidification, energy saving, **: Adopting advanced media humidification and evaporation technology, the evaporative cooling media is a patented product of the Swedish company. It is made of plant fiber pulp with special chemical raw materials. It has good hygroscopicity and wet stiffness. Degree, its chemical composition will not decompose with the action of water flow and air flow. A new feeling of nature: the doors and windows are open to cool the air, and the indoor air is always 100% fresh. It is a major feature of the evaporative air conditioner, and it has a unique function of using water to clean and filter air, which can effectively remove Keep dust, bacteria and harmful gases in the outside air clean and indoor at all times. Completely environmentally friendly product, the cooling effect is obvious: this machine is a compressor-free, pollution-free environmentally friendly product that uses the water on the medium to evaporate to cool the brand-new air entering the room. Water shortage automatic control: When the machine is humidified, the operation of the water pump is controlled by the water tank water level switch. When the water volume of the water tank is insufficient, the water level sensor sends out a water shortage alarm signal. After 30 seconds, the machine automatically enters the standby state. When the water level is reached, the system needs to be restarted before the system can continue to run. Convenient air supply adjustment: This machine is equipped with airflow guide needles, which can adjust the air supply direction as required, and has three wind speeds: high wind, medium wind, and low wind. Conditions for using wet film humidifier 1. Operating environment: temperature 0 ~ 40 ℃, humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: tap water or the same type of water, pure water, softened water 4. Water supply pressure: 0.1 ~ 0.3 Mpa industry application in the textile industry: reduce the occurrence of thread breakage and clothes wrinkling and cannot be formed; reduce the trouble of fibrous membranes during spinning; reduce the entanglement of raw yarns on the machine to eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • Air duct wet film humidifier

    Air duct wet film humidifier

    Product introduction: The air duct wet film humidifier is a combination of a wet film humidifier and a special air duct. It is mainly used in a humidification form used because a humidifier cannot be installed in a combined air conditioning unit or a new fan unit. It can be installed in Any position of the air supply duct can meet the humidification requirements of the entire space or local space. Conditions for use of air duct wet film humidifier: 1. Operating environment: Temperature 0 ~ 40 ℃, Humidity less than 90% RH 2. Power source: 220V / 50Hz 3. Water source: Tap water or the same type of water 4. Water supply pressure: greater than 0.05Mpa 5. Pass wind The wind speed of the pipe wet film humidifier is less than 3.5m / s6. The diameter of the water outlet of the pipe wet film humidifier: 6.1 When the air volume is less than 8000 m3 / h, choose DN25. 6.2 When the air volume is between 8000 and 20000 m3 / h, DN32 is selected. 6.3 When the air volume is greater than 20000 m3 / h, select DN42. Technical parameters of air duct wet film humidifier: Structural diagram: Industry application: Textile industry: reduce the occurrence of thread breakage and clothes wrinkling and failure to form; reduce the trouble of fibrous film when spinning; Static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • Circulating water wet film humidifier

    Circulating water wet film humidifier

    Product introduction: clean tap water enters the circulating water tank through the water inlet pipe, and its high water level is controlled by the water inlet switch; when the humidifier is working, the circulating water pump sends the water in the water tank to the water sprinkler on the top of the humidifier, and the water sprinkler Ensure that the water is evenly distributed to the wet film material. Water penetrates downward from the top of the wet film material and is absorbed by the wet film material to form a uniform water film. When the dry air passes through the humidifier, a part of the water contacts the air, vaporizes, Evaporate to make the air moist (that is, increase the humidity); the other part of the non-evaporated water flows from the lower part of the humidifier back to the circulating water tank; the water in the circulating water tank is repeatedly recycled by the circulating water pump to humidify the air passing through the wet film. When the water level in the circulating water tank drops, the water inlet switch is turned on to replenish the water tank to ensure that the water level of the water tank is maintained at the set height range; when the water level in the circulating water tank drops to a certain height, the low water level switch in the water tank Work to ensure that the circulating water pump stops running in the absence of water. After the water in the circulating water tank is circulated for a certain period of time, the water is drained through the drain of the water tank, the water tank is cleaned, and the clean water is replaced to ensure that the circulating water and the humidified air are not polluted by the secondary. Structure diagram: Organic wet film parameters: Stainless steel wet film parameters: Selection of circulating water wet film humidifier system: 1. Selection of humidifier (see direct-drain wet film humidifier) 2. Width and height of wet film host and circulating water tank Choice of width and height 1) Suppose the circulating water wet film humidifier system is installed behind the air conditioner. W (wet film width) = heat exchanger width H (wet film height) = height inside the air conditioning box 2) assume circulating water wet film Humidifier system installed in the air-conditioning empty section W (wet film width) = width of the air-conditioning box H (wet film height) = height of the air-conditioning box 3) Selection of the width and height of the circulating water tank Installation of circulating water wet film humidifier system: industry Application: Textile industry: reduce the occurrence of thread breakage and clothes wrinkling cannot be formed; reduce the trouble of fibrous film when spinning; reduce the entanglement of raw material yarn on the machine, eliminate static electricity and dust removal. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
  • Direct drainage wet film humidifier

    Direct drainage wet film humidifier

    Product introduction: The clean tap water is sent to the top of the wet film humidifier through the pipeline. Under the action of gravity, it penetrates down the wet film surface and is fully absorbed by the wet film material to form a uniform water film; When the hot air passes through the wet film, the water sufficiently absorbs the heat of the air and evaporates, thereby humidifying the air. During this humidification process, the humidity of the air increases and the temperature decreases, but the enthalpy of the system does not change. Characteristics of wet film material: The wet film material (also known as "Sedek") is the core of the wet film humidifier. It uses plant fibers, glass fibers, aluminum alloys, stainless steel, etc. as the base material and is sintered with a special component resin treatment. Forms a corrugated plate-like cross-overlapping polymer composite material, which contains a slow-release bacteriostatic agent, which has strong water absorption, good self-cleaning ability, non-toxic, acid and alkali resistance, mold resistance, flame retardant and provides The surface area of contact between moisture and air. At present, the main types of wet films are: organic wet film, inorganic wet film, aluminum alloy wet film, stainless steel wet film, etc. Working principle: The clean tap water through the filter and solenoid valve is sent to the top of the wet membrane through the water supply pipe. Under the action of gravity, the water penetrates down the wet membrane material, and the water is absorbed by the wet membrane material to form a uniform water film. ; When the dry air passes through the wet film material, the water molecules fully absorb the heat in the air and vaporize and evaporate, so that the humidity of the air is increased, and humid air is formed. During this process, the humidity of the air increases and the temperature decreases, but the enthalpy of the air remains the same (is an isenthalpic humidification) and does not consume additional energy. Organic wet film technical parameters: Test conditions: Intake air working conditions are dry bulb 40 ℃, relative humidity 15% RH, oncoming wind speed 2.5m / s wet film performance: in China, there are usually three wave heights of 5mm, 7mm and 9mm. The ripples are 60 ° × 30 ° staggered opposites and 45 ° × 45 ° staggered opposites. Stainless steel wet film technical parameters Direct drain wet film humidifier structure: Direct drain wet film humidifier Operating conditions: 1. Ambient temperature and humidity: wet film humidifier host 5∽100 ℃ Electric control box 5∽50 ℃ 90% RH or less 2. Critical wind speed: less than 4m / s 3. Water supply quality: tap water or the same type of water 4. Water supply temperature: 5∽40 ℃ 5. Water supply pressure: 0.15∽0.75Mpa5. Water supply pressure: 0.15∽0.75Mpa6. Power supply: 220V / 50HZ direct drainage Wet film humidifier installation: 1. Install a Dmm thickness direct-drain wet film humidifier air conditioner unit. The rear of the surface cooler is provided with an empty section, and the length is (D + 150) mm. 2. An air conditioning unit with a Dmm thickness direct-drain wet-film humidifier must have a water receiving tray at the bottom of the humidifier, and a space for the humidifier must be reserved in the water receiving tray. 3. The vertical drain wet film humidifier should be installed vertically, and the left and right tilt angle should not be greater than 3º. 4. DN15 water supply pipe and 220V / 50HZ three-core socket must be provided on site. The water source and power supply must be led within 2 meters from the installation location of the air-conditioning unit. Schematic diagram of the installation of a direct-drain wet-film humidifier in an air-conditioning unit. Industry applications: Textile industry: reduce the occurrence of thread breakage and clothes wrinkling and failure to form; Eliminate static electricity and dust. Electronics industry: semiconductor component factory, LCD factory, PCB factory, IC test factory, etc. to prevent static damage, electrostatic adsorption and electromagnetic interference. Planting industry: humidity control for large-scale cultivation of fungi, flowers, tropical plants and soilless cultivation. Tobacco industry: tobacco processing, production humidity control and dust reduction. Paper industry: reduce the uniformity of paper jams due to unevenness during transportation, prevent the ignition of small particles of paper, eliminate static electricity and reduce dust. Spraying industry: Humidity control in automobile painting plants and various spraying plants, avoiding dust in the air, and reducing defective products caused by electrostatic adhesion. Plastic industry: reduce the trouble of the slicer caused by static electricity and avoid the explosion of flammable gas. Printing industry: reduce the occurrence of printing errors, uneven coloring of finishing documents, paper warping and other problems during paper transportation, and improve the clarity of color printing. Fresh-keeping storage: constant temperature fresh-keeping and storage of fruit and vegetable products. Aquaculture: large-scale breeding and disinfection of livestock, birds and insects. Gunpowder industry: gunpowder production, filling, manufacturing, storage and elimination of static electricity.
about us
Product center
Service Center
CONTACT
contact us
  • Sales Hotline: 4008-829-816
  • Company email: jibei118@sina.com
  • Address of Company: A3-2016, Lane 1588, South Wangyuan Road, Fengxian District, Shanghai
You are the 56457 visitor!